RS PRO Oscilloskopprobe Aktiv 25MHz BNC

  • RS-varenummer 179-9565
  • Fabrikant RS PRO
Tekniske referencer
Lovgivning og oprindelsesland
COO (Country of Origin): TW
Generel produktinformation

RS PRO Oscilloscope Probe

The RS-SI 9001 oscilloscope probe from our own trusted and reliable brand RS PRO, is an active differential probe which allows safe and accurate measurements between two voltage signals that are referenced to each other. The RS-SI 9001 features switchable attenuation of 10:1 and 100:1, 25 MHz bandwidth and ±700 V maximum differential. The probe is also compatible with all oscilloscopes from numerous manufacturers which have 1MOhm BNC input. The probe can be operated either by 4xAA batteries or by the supplied USB power lead, which is needed to powerup the active devices within the probe.

Features and benefits

• Differential probe
• 2 x sprung hooks red & black
• 4 x AA batteries for carrying out tests wirelessly
• USB power lead to ensure a constant power supply
• User manual
• Factory calibration certificate
• Hard case included for safe storage and prevent accidental damage
• Reliable and easy to use

What is a differential oscilloscope probe?

A differential probe is an active probe that features both negative and positive inputs, as well as a separate ground lead. Differential probes are popular for measuring high-frequency signals or signals of very low amplitude. It drives a single terminated 50Ω cable to transmit its output to one oscilloscope channel.

What is oscilloscope bandwidth?

The bandwidth of an oscilloscope specifies the usable frequency range of the oscilloscope. The signal processing circuitry of an oscilloscope acts like a low pass filter, limiting the frequency behavior of the device. Therefore, for a proper analysis, the oscilloscope bandwidth must be considerably higher than the frequency of the signal under test.

How to select the correct oscilloscope probe?

When selecting the correct probe, make sure the probe’s capacitance is within the measuring range of the oscilloscope. Active probes have the ability to support much higher signal bandwidths, which is why they tend to be favoured by most engineers when used in higher performing applications.

What is an active probe?

An active probe is different from a passive probe as they contain a small active amplifier built into the body near the probe tip, ensuring minimal probe input capacitance. An active probe is also the least intrusive of all probes due to a significantly lower capacitive loading whilst providing greater accuracy.

Attribute Value
Følertype Aktiv
Dæmpning 1:10, 1:100
Båndbredde 25
Common-mode indgangsspænding maks. 700V
Konnektor type BNC
Sikkerhedsniveau CAT III
Stigetid 14ns
8 På lager til levering inden for 1 arbejdsdag(e)
Pris (Leveres Pr. stk.)
kr 3.975,23
(ekskl. moms)
kr 4.969,04
(inkl. moms)
Pr stk.
1 +
kr 3.975,23