Microchip AEC-Q100, CAN transceiver, 1 Mbit/s, Standby, 8 Ben, SOIC
- RS-varenummer:
- 177-3154P
- Producentens varenummer:
- MCP2561T-E/SN
- Brand:
- Microchip
Kan ikke leveres i øjeblikket
Vi ved ikke, om dette produkt kommer på lager igen. RS har planer om at tage det ud af sortimentet inden længe.
- RS-varenummer:
- 177-3154P
- Producentens varenummer:
- MCP2561T-E/SN
- Brand:
- Microchip
Egenskaber
Tekniske referencer
Lovgivning og oprindelsesland
Generel produktinformation
Find lignende produkter ved at vælge én eller flere attributter.
Vælg alle | Attribut | Værdi |
|---|---|---|
| Brand | Microchip | |
| Bilindustristandarder | AEC-Q100 | |
| Produkttype | CAN transceiver | |
| Datahastighed maks. | 1 Mbit/s | |
| Strømnedlukningsform | Standby | |
| Benantal | 8 | |
| Emballagetype | SOIC | |
| Højde | 1.5 mm | |
| Interfacetype | CAN | |
| Længde | 4.9 mm | |
| Driftstemperatur maks. | 125 °C | |
| Forsyningsspænding maks. | 5.5 V | |
| Min. driftstemperatur | -40 °C | |
| Forsyningsspænding min. | 4.5 V | |
| Monteringstype | Overflade | |
| Antal transceivere | 1 | |
| Serie | MCP2561 | |
| Standarder/godkendelser | ISO-11898 | |
| Undertype | Transceiver | |
| Forsyningsstrøm | 70 mA | |
| Bredde | 3.9 mm | |
| Vælg alle | ||
|---|---|---|
Brand Microchip | ||
Bilindustristandarder AEC-Q100 | ||
Produkttype CAN transceiver | ||
Datahastighed maks. 1 Mbit/s | ||
Strømnedlukningsform Standby | ||
Benantal 8 | ||
Emballagetype SOIC | ||
Højde 1.5 mm | ||
Interfacetype CAN | ||
Længde 4.9 mm | ||
Driftstemperatur maks. 125 °C | ||
Forsyningsspænding maks. 5.5 V | ||
Min. driftstemperatur -40 °C | ||
Forsyningsspænding min. 4.5 V | ||
Monteringstype Overflade | ||
Antal transceivere 1 | ||
Serie MCP2561 | ||
Standarder/godkendelser ISO-11898 | ||
Undertype Transceiver | ||
Forsyningsstrøm 70 mA | ||
Bredde 3.9 mm | ||
The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length.The device family members are MCP2561FD with SPLIT pin & MCP2562FD with VIO pin
Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
CAN Bus Pins are