Knipex 1 Tang, Kæbelængde: 18mm, L: 12mm
- RS-varenummer:
- 267-7050
- Producentens varenummer:
- 36 32 125
- Brand:
- Knipex
Indhold (1 enhed)*
Kr. 470,49
(ekskl. moms)
Kr. 588,11
(inkl. moms)
GRATIS levering for online ordrer over 600,00 kr.
På lager hos producent
- Klar til afsendelse fra 14. december 2026
Har du brug for mere? Indtast den mængde, du har brug for, og klik på "Tjek leveringsdatoer"
Enheder | Per stk. |
|---|---|
| 1 + | Kr. 470,49 |
*Vejledende pris
- RS-varenummer:
- 267-7050
- Producentens varenummer:
- 36 32 125
- Brand:
- Knipex
Egenskaber
Tekniske referencer
Lovgivning og oprindelsesland
Generel produktinformation
Find lignende produkter ved at vælge én eller flere attributter.
Vælg alle | Attribut | Værdi |
|---|---|---|
| Brand | Knipex | |
| Produkttype | Tang | |
| Antal stykker | 1 | |
| VDE/1000V godkendt | Nej | |
| Samlet længde | 12mm | |
| Klippekapacitet | 1 mm | |
| Materiale | Stål | |
| Håndgrebstype | Komfortabelt greb | |
| ESD-sikker | Nej | |
| Kæbelængde | 18mm | |
| Finish | Spejlpoleret | |
| Gnistfri | Nej | |
| Standarder/godkendelser | REACH SVHC Not Contained | |
| Vælg alle | ||
|---|---|---|
Brand Knipex | ||
Produkttype Tang | ||
Antal stykker 1 | ||
VDE/1000V godkendt Nej | ||
Samlet længde 12mm | ||
Klippekapacitet 1 mm | ||
Materiale Stål | ||
Håndgrebstype Komfortabelt greb | ||
ESD-sikker Nej | ||
Kæbelængde 18mm | ||
Finish Spejlpoleret | ||
Gnistfri Nej | ||
Standarder/godkendelser REACH SVHC Not Contained | ||
Ikke i overensstemmelse med RoHS
- COO (Country of Origin):
- DE
KNIPEX 36 32 125 Electronics Mounting Pliers with multi-component handles 125 mm
36 32 125 Electronics Mounting Pliers for bending and cutting off wire ends on components. Robust, load-optimized construction with through-pinned and backlash-free precision joint. Side angles carefully rounded: no sharp, material-damaging edges. High, slim sleeves for fine and comfortable gripping between thumb and index finger. Uniform bending behavior for a more direct sense of work. Smooth ground gripping surfaces, edges carefully deburred. Low-friction double spring for smooth and even opening. The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools. to crunch and cut wire at 1.6 mm length below the board. - Cutting capacities soft wire (diameter): Ø 1.0mm- Jaw thickness (joint) (T1): 7.0mm- Tips thickness (W4): 3.0mm- Head width (W3): 11.0mm- Handle width: 7.5mm- Jaw length (L3): 18.0mm- Application: cut at 1.6 mm and crunch wire
Egenskaber og fordele
For Bending And Cutting Off Wire Ends On Components
Robust, Load-Optimized Construction With Through-Pinned And Backlash-Free Precision Joint
Side Angles Carefully Rounded: No Sharp, Material-Damaging Edges
To Crunch And Cut Wire At 1.6 Mm Length Below The Board
Robust, Load-Optimized Construction With Through-Pinned And Backlash-Free Precision Joint
Side Angles Carefully Rounded: No Sharp, Material-Damaging Edges
To Crunch And Cut Wire At 1.6 Mm Length Below The Board
Tekniske egenskaber
High, Slim Sleeves For Fine And Comfortable Gripping Between Thumb And Index Finger
Uniform Bending Behavior For A More Direct Sense Of Work
Smooth Ground Gripping Surfaces, Edges Carefully Deburred
Low-Friction Double Spring For Smooth And Even Opening
The Mirror Polish In Combination With A Fine Oil Film Provides Rust Protection - No Circuit Faults Caused By Peeling Chrome From Plated Tools
Uniform Bending Behavior For A More Direct Sense Of Work
Smooth Ground Gripping Surfaces, Edges Carefully Deburred
Low-Friction Double Spring For Smooth And Even Opening
The Mirror Polish In Combination With A Fine Oil Film Provides Rust Protection - No Circuit Faults Caused By Peeling Chrome From Plated Tools