onsemi, AC/DC-konverter 1.05 A, 78 Ben, PDIP
- RS-varenummer:
- 178-4343
- Producentens varenummer:
- NCP1079BBP130G
- Brand:
- onsemi
Lagerinformation er i øjeblikket ikke tilgængelig
- RS-varenummer:
- 178-4343
- Producentens varenummer:
- NCP1079BBP130G
- Brand:
- onsemi
Egenskaber
Tekniske referencer
Lovgivning og oprindelsesland
Generel produktinformation
Find lignende produkter ved at vælge én eller flere attributter.
Vælg alle | Attribut | Værdi |
|---|---|---|
| Brand | onsemi | |
| Produkttype | AC/DC-konverter | |
| Maks. indgangsspænding | 10V | |
| Udgangseffekt | 14W | |
| Monteringstype | Hulmontering | |
| Benantal | 78 | |
| Switching-frekvens | 130kHz | |
| Udgangsstrøm maks. | 1.05A | |
| Emballagetype | PDIP | |
| Min. indgangsspænding | -0.3V | |
| Topologi | Flyback | |
| Min. driftstemperatur | 150°C | |
| Duty cycle maks. | 72% | |
| Driftstemperatur maks. | 150°C | |
| Serie | NCP1079 | |
| Standarder/godkendelser | No | |
| Længde | 9.37mm | |
| Højde | 3.43mm | |
| Forsyningsstrøm | 1.1mA | |
| Bilindustristandarder | Nej | |
| Udgangsstrøm min. | 400mA | |
| Vælg alle | ||
|---|---|---|
Brand onsemi | ||
Produkttype AC/DC-konverter | ||
Maks. indgangsspænding 10V | ||
Udgangseffekt 14W | ||
Monteringstype Hulmontering | ||
Benantal 78 | ||
Switching-frekvens 130kHz | ||
Udgangsstrøm maks. 1.05A | ||
Emballagetype PDIP | ||
Min. indgangsspænding -0.3V | ||
Topologi Flyback | ||
Min. driftstemperatur 150°C | ||
Duty cycle maks. 72% | ||
Driftstemperatur maks. 150°C | ||
Serie NCP1079 | ||
Standarder/godkendelser No | ||
Længde 9.37mm | ||
Højde 3.43mm | ||
Forsyningsstrøm 1.1mA | ||
Bilindustristandarder Nej | ||
Udgangsstrøm min. 400mA | ||
- COO (Country of Origin):
- CN
The NCP1079A & NCP1079B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).
Up to 30W output SMPS design capability
Ability to scale for efficiency or size
Adjust output current protection based on output power demand
Eliminate acoustic noise
Eliminate Aux winding
Provides more robust protection without worrying about the coupling of the aux winding
Improved efficiency at light load / Improved EMI over the entire load
<50mW no Load Power Consumption
Better EMI Signature Over the Entire Operating Range
Enhanced Protection Against too Low or too High Input Voltage